Die Spannungs- und Stromangaben sind als Betrag aufzufassen. Vorzeichen müssen entsprechend Betriebsart und Polarität des Halbleitermaterials gesetzt werden.

Voltage and current ratings are given as magnitude, where the sign has to be set according to operating condition and polarity of the semiconductor material.

	2N2876
Rate POUT: @PIN: @f: @UCE: @Ic: @Tc:	MIN 10 2.0 50 28 500 25	MIN 3.0 1.0 150 28 275 25	W W MHz V mA °C
Ref *?	109 Rca67		14070

	AFY19			HF-Leistungsverstärker RF Power Amplifier Parts: AFY19: f=80MHz AFY19: f=180MHz
Rate POUT: GP: RG: RL: IE: @f: @UEE: @TA: Rate C1: C2: C3: C4: C5: C6: C7:	MIN TYP 0.5 10 - - - - - - - - 50 50 80 80 12 25 TYP MAX - - 10 - 10 82 - 50 50 - 50 - - 100	MIN TYP 0.4 9.0 - - - - - - - - 50 50 80 180 12 25 TYP MAX - - 1.0 - 0.12 0 - 15 15 - 15 - - 15	W dB OHM OHM mA MHz V °C   pF pF nF pF nF pF pF
Ref *?	Val65		14708

		AFY19			f = 80MHz - Beschreibung der Bauteile - Parts Description
L1:		100	nH		Q > 150, Teilwindungen n1=50%, n2=50%, n3=0%
L2:		30	nH		Q > 150
L3:			nH		Drossel - RF choke
C5:		10	nF		induktivitätsarm - low-inductance bypass capacitor
		AFY19			f = 180MHz - Beschreibung der Bauteile - Parts Description
L1:		80	nH		Q > 200, Teilwindungen n1=22%, n2=28%, n3=50%
L2:		20	nH		Q > 200
L3:			nH		Drossel - RF choke
C5:		120	pF		induktivitätsarm - low-inductance bypass capacitor

	BFQ42		BFQ43		BFS22A		BFS23A
Class Rate POUT: f: UCE: zi: YL: Rate PIN: eta: GP: Ic: @RthCA: @TA: @Ts: @TM:	B NOM 2.0 175 13.5 7.8–j4.6 22–j18 MIN MAX - 60 11 - 0.16 - - 0.25 32 25 - -	B NOM 2.0 175 12.5 - - TYP - 65 10.5 - 32 25 - -	B NOM 4.0 175 13.5 3.2–j0.03 53–j29 MIN MAX - 55 12 - 0.25 - - 0.54 - - 25 -	B NOM 4.0 175 12.5 - - TYP - 60 12 - - - 25 -	B NOM 4.0 175 13.5 3.9–j2.2 37–j22 MIN MAX - 60 8.0 - 0.63 - - 0.49 - - - 25	B NOM 4.0 175 12.5 - - TYP 0.63 60 8.0 - - - - 25	B NOM 4.0 175 28 2.3–j1.6 8.9–j18.1 MIN MAX - 65 10 - 0.4 - - 0.22 - - - 25	W MHz V OHM mA/V   W % dB A K/W °C °C °C
Ref *?	Ci1 Val84		Ci1 Val84		Ci1 Val84		Ci1 Val84	14085

HF-Leistungsverstärker, nicht neutralisiert, Dauerstrich-Betrieb Unneutralized RF Power Amplifier - CW Operation
Parts: BFQ42 BFQ43 BFS22A BFS23A

		BFQ42			Beschreibung der Bauteile - Parts Description
R1:		220	OHM		Carbon resistor
R2:		10	OHM		Carbon resistor
C1:		4.0-40	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07008)
C2:		4.0-40	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07008)
C3:		0	pF		Nicht benutzt - Not used
C4:		4.0-40	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07008)
C5:		2.5-20	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07004)
C6:		100	pF		Ceramic capacitor
C7:		100	nF		Polyester capacitor
L1:			nH		3 Windungen 1,0mm CuL, Innendurchmesser 4mm, Länge 4mm 3 turns enamelled Cu wire (1.0mm), 4mm inner diameter, 4mm length, leads 2x5mm
L2:		0	nH		Nicht benutzt - Not used
L3:			nH		Ferrocube Breitband-HF-Drossel, Typ 3B - Ferroxcube wide-band RF choke, grade 3B (cat. no. 4312 020 36640)
L4:			µH		4 Windungen 1,0mm Cu, Innendurchmesser 6mm, Länge 6mm 4 turns Cu wire (1.0mm), 6mm inner diameter, 6mm length, leads 2x5mm
L5:			nH		4 Windungen 1,0mm Cu, Innendurchmesser 6mm, Länge 6mm 4 turns Cu wire (1.0mm), 6mm inner diameter, 6mm length, leads 2x5mm
L6:		0	nH		Nicht benutzt - Not used
L7:			nH		Ferrocube Breitband-HF-Drossel, Typ 3B - Ferroxcube wide-band RF choke, grade 3B (cat. no. 4312 020 36640)

		BFQ43			Beschreibung der Bauteile - Parts Description
R1:		10	OHM		Carbon resistor
R2:		10	OHM		Carbon resistor
C1:		2.5-20	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07004)
C2:		4.0-40	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07008)
C3:		0	pF		Nicht benutzt - Not used
C4:		4.0-40	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07008)
C5:		2.5-20	pF		Folientrimmer - Film dielectric trimmer (cat. no. 2222 809 07004)
C6:		100	pF		Ceramic capacitor
C7:		100	nF		Polyester capacitor
L1:			nH		2 Windungen 1,0mm Cu, Innendurchmesser 4mm, Länge 3mm 2 turns Cu wire (1.0mm), 4mm inner diameter, 3mm length, leads 2x5mm
L2:			nH		7 Windungen 0,5mm CuL, Innendurchmesser 3mm, Länge 4mm 4 turns Cu wire (0.5mm), 3mm inner diameter, 4mm length, leads 2x5mm
L3:			nH		Ferrocube Breitband-HF-Drossel, Typ 3B - Ferroxcube wide-band RF choke, grade 3B (cat. no. 4312 020 36640)
L4:			µH		4 Windungen 1,0mm CuL, Innendurchmesser 5,5mm, Länge 5mm 4 turns enamelled Cu wire (1.0mm), 5.5mm inner diameter, 5mm length, leads 2x5mm
L5:			nH		5 Windungen 1,0mm CuL, Innendurchmesser 5,5mm, Länge 7,5mm 5 turns enamelled Cu wire (1.0mm), 5.5mm inner diameter, 7.5mm length, leads 2x5mm
L6:		0	nH		Nicht benutzt - Not used
L7:			nH		Ferrocube Breitband-HF-Drossel, Typ 3B - Ferroxcube wide-band RF choke, grade 3B (cat. no. 4312 020 36640)

		BFS22A			Beschreibung der Bauteile - Parts Description
R1:		10	OHM		Carbon resistor
R2:		10	OHM		Carbon resistor
C1:		4.0-29	pF		Lufttrimmer mit isoliertem Rotor - Air trimmer with insulated rotor
C2:		4.0-29	pF		Lufttrimmer mit nichtisoliertem Rotor - Air trimmer with non-insulated rotor
C3:		39	pF		Ceramic capacitor
C4:		4.0-29	pF		Lufttrimmer mit isoliertem Rotor - Air trimmer with insulated rotor
C5:		4.0-29	pF		Lufttrimmer mit nichtisoliertem Rotor - Air trimmer with non-insulated rotor
C6:		100	pF		Ceramic capacitor
C7:		15	nF		Polyester capacitor
L1:			nH		1 Windung 1,0mm CuL, Innendurchmesser 10mm 1 turn enamelled Cu wire (1.0mm), 10mm inner diameter, leads 2x10mm
L2:			nH		6 Windungen 0,7mm CuL, Innendurchmesser 4mm 6 turns enamelled Cu wire (0.7mm), 4mm inner diameter, leads 2x10mm
L3:			nH		Ferrocube HF-Drossel - Ferroxcube RF choke (cat. no. 4312 020 36640)
L4:			µH		8 Windungen 0,7mm CuL, Innendurchmesser 4mm 8 turns enamelled Cu wire (0.7mm), 4mm inner diameter, leads 2x10mm
L5:			nH		5 Windungen 1,0mm CuL, Innendurchmesser 8mm, Windungsabstand 1mm 5 turns enamelled Cu wire (1.0mm), 8mm inner diameter, winding pitch 1mm, leads 2x10mm
L6:			nH		7 Windungen 1,0mm CuL, Innendurchmesser 6mm, Windungsabstand 1mm 7 turns enamelled Cu wire (1.0mm), 6mm inner diameter, winding pitch 1mm, leads 2x5mm
L7:			nH		Ferrocube HF-Drossel - Ferroxcube RF choke (cat. no. 4312 020 36640)

		BFS23A			Beschreibung der Bauteile - Parts Description
R1:		10	OHM		Carbon resistor
R2:		10	OHM		Carbon resistor
C1:		4.0-29	pF		Lufttrimmer mit isoliertem Rotor - Air trimmer with insulated rotor
C2:		4.0-29	pF		Lufttrimmer mit nichtisoliertem Rotor - Air trimmer with non-insulated rotor
C3:		39	pF		Ceramic capacitor
C4:		4.0-29	pF		Lufttrimmer mit isoliertem Rotor - Air trimmer with insulated rotor
C5:		4.0-29	pF		Lufttrimmer mit nichtisoliertem Rotor - Air trimmer with non-insulated rotor
C6:		100	pF		Ceramic capacitor
C7:		15	nF		Polyester capacitor
L1:			nH		1 Windung 1,0mm CuL, Innendurchmesser 10mm 1 turn enamelled Cu wire (1.0mm), 10mm inner diameter, leads 2x10mm
L2:			nH		6 Windungen 0,7mm CuL, Innendurchmesser 4mm 6 turns enamelled Cu wire (0.7mm), 4mm inner diameter, leads 2x10mm
L3:			nH		Ferrocube HF-Drossel - Ferroxcube RF choke (cat. no. 4312 020 36640)
L4:			µH		8 Windungen 0,7mm CuL, Innendurchmesser 4mm 8 turns enamelled Cu wire (0.7mm), 4mm inner diameter, leads 2x10mm
L5:			nH		5 Windungen 1,0mm CuL, Innendurchmesser 8mm, Windungsabstand 1mm 5 turns enamelled Cu wire (1.0mm), 8mm inner diameter, winding pitch 1mm, leads 2x10mm
L6:			nH		4 Windungen 1,0mm CuL, Innendurchmesser 6mm, Windungsabstand 1mm 4 turns enamelled Cu wire (1.0mm), 6mm inner diameter, winding pitch 1mm, leads 2x5mm
L7:			nH		Ferrocube HF-Drossel - Ferroxcube RF choke (cat. no. 4312 020 36640)

	BLW16
Rate POUT: eta: @PIN: @f: @Ucc: @Tc:	MIN 1.4 60 0.1 175 12 25	W % W MHz V °C
Ref *?	Txi73	14074

	BLY17		Neutralisierter HF-Leistungsverstärker Neutralized RF Power Amplifier
Rate POUT: eta: GP: ZIN: ZOUT: @f: @UCE: @TA: Rate C1: C2: C3: C4: C5: C6: C7: C8:	MIN TYP 30 40 6.0 - - - - - - - - 50 50 30 40 25 TYP MAX - - 150 10 - - 2.7 3.9 25 25 - - 25 25 - -	W % dB OHM OHM MHz V °C   pF pF pF pF pF pF nF nF
Ref *?	Val65	14060

		BLY17			Beschreibung der Bauteile - Parts Description
R1:		15	OHM		1 Watt, variabel
R2:		15	OHM		1 Watt
R3:		150	OHM		15 Watt
R4:		2.7	OHM		10 Watt
L1:			nH		14 Windungen 1,2mm CuL, Innendurchmesser 12mm
L2:			nH		2 Windungen 1,2mm CuL, Innendurchmesser 12mm, am masseseitigen Ende von L1
L3:			nH		Neutralisationsspule, 5 Windungen 1,2mm CuL, Innendurchmesser 12mm
L4:			µH		HF-Drossel, 27 Windungen 0,5mm CuL, Innendurchmesser 6mm
L5:			nH		11 Windungen 1,2mm CuL, Innendurchmesser 12mm
L6:			nH		11 Windungen 1,2mm CuL, Innendurchmesser 12mm, Anzapfung bei 2 Windungen vom masseseitigen Ende von L1

	MRF8004	NCBJ35		Test Circuit: CB Radio Output Stage
Rate POUT: eta: GPE: RIN: CIN: COUT: @PIN: @f: @ICAV: @Ucc: @Tc:	MIN TYP - 62.5 10 - - - - - - - - 3.5 - - 21 900 200 - 27 - 12.5 25	MIN TYP 3.0 60 - - - - - - - - - 3.5 70 - - - - 0.4 27 415 12 25	W % dB OHM pF pF W MHz mA V °C
Ref *?	Fsc76 Mot74	Nsc77	14059

		MRF8004			Beschreibung der Bauteile - Parts Description
C1:		9.0-180	pF		ARCO 463 or equivalent
C2:		9.0-180	pF		ARCO 463 or equivalent
C3:		5.0-80	pF		ARCO 462 or equivalent
C4:		5.0-80	pF		ARCO 462 or equivalent
C5:		20	nF		Scheibenkondensator - Disc capacitor
C6:		100	nF		Scheibenkondensator - Disc capacitor
L1:		220	nH		Drossel - Molded choke
L2:			nH		4 turns #30 enameled wire wound on Ferroxcube Bead type 56-590-65/3B
L3:			µH		26 turns #22 enameled wire (2 layers - 13 turns each layer) 1/4" inner diameter
L4:		680	nH		Drossel - Molded choke
L5:		0	nH		Nicht benutzt - Not used

		NCBJ35			Beschreibung der Bauteile - Parts Description
C1:		9.0-180	pF		ARCO 463 or equivalent
C2:		9.0-180	pF		ARCO 463 or equivalent
C3:		5.0-80	pF		ARCO 463
C4:		5.0-80	pF		ARCO 463
C5:		10	nF		Scheibenkondensator - Disc capacitor
C6:		100	nF		Scheibenkondensator - Disc capacitor
L1:		220	nH		Drossel - Molded choke
L2:			nH		4 turns No. 32 enameled wire wound on Indiana General Bead No. 57-1692
L3:			µH		26 turns No. 22 enameled wire 1/4" I.D. (2 layers)
L4:		1.0	µH		Drossel - Molded choke
L5:			nH		Ferritperle - Ferrite bead